Main ContribUtilities
These are utilities contributed by users.
Contents
1 Utilities that fit into the OpenFOAM scheme
The structure of this page is modelled after the directory structure of the utility sources.
1.1 errorEstimation
[[1] [WTHPD1]] WTHPD2 [| WTHPD3] | WTHPD4 [WTHPD5 | http://WTHP5.coolhost.biz] [WTHPD6] http://WTHP7.coolhost.biz http://WTHP8.coolhost.biz
1.2 mesh
1.2.1 advanced
[[2] [WTHPD1]] WTHPD2 [| WTHPD3] | WTHPD4 [WTHPD5 | http://WTHP5.coolhost.biz] [WTHPD6] http://WTHP7.coolhost.biz http://WTHP8.coolhost.biz
1.2.2 conversion
- fluentMeshToFoamWithInternals: modified version of fluentMeshToFoam that writes cellZones and faceZones
1.2.3 generation
- blockMeshWithSets: generates a mesh from a blockMeshDict with cellSets
[[3] [WTHPD1]] WTHPD2 [| WTHPD3] | WTHPD4 [WTHPD5 | http://WTHP5.coolhost.biz] [WTHPD6] http://WTHP7.coolhost.biz http://WTHP8.coolhost.biz
1.2.4 manipulation
- makeAxialMesh: converts a 2D-mesh into an axial-symmetric (wedge) mesh
[[4] [WTHPD1]] WTHPD2 [| WTHPD3] | WTHPD4 [WTHPD5 | http://WTHP5.coolhost.biz] [WTHPD6] http://WTHP7.coolhost.biz http://WTHP8.coolhost.biz
1.3 miscellaneous
[[5] [WTHPD1]] WTHPD2 [| WTHPD3] | WTHPD4 [WTHPD5 | http://WTHP5.coolhost.biz] [WTHPD6] http://WTHP7.coolhost.biz http://WTHP8.coolhost.biz
1.4 parallelProcessing
[[6] [WTHPD1]] WTHPD2 [| WTHPD3] | WTHPD4 [WTHPD5 | http://WTHP5.coolhost.biz] [WTHPD6] http://WTHP7.coolhost.biz http://WTHP8.coolhost.biz
1.5 postProcessing
- calcPressureDifference: Simple Utility to calculate the Pressure Difference between two boundaries
- calcMassFlow: Simple Utility to calculate the mass-flow through selected boundaries and face-sets
1.6 preProcessing
1.7 surface
1.8 thermophysical
[[7] [WTHPD1]] WTHPD2 [| WTHPD3] | WTHPD4 [WTHPD5 | http://WTHP5.coolhost.biz] [WTHPD6] http://WTHP7.coolhost.biz http://WTHP8.coolhost.biz
2 Other
These utilities don't fit into the above categories.